ProFila Premium Filament
PET-CF Speed (made in EU)
ProFila PET-CF Speed is a premium carbon fiber PET 3D filament suitable for a wide range of applications. It offers superior properties and can be used in any FDM/FFF 3D printer. Ideal for office and textile machinery as well as mechanical parts like supports, this filament guarantees 100% printability and satisfaction.
Moisture-resistant and ensuring repeatability in large prints, this filament is recommended to be pre-dried at 120°C for 4-6 hours before printing, with extended drying time for spools up to 1 kg. It’s advised not to leave the filament in the nozzle for longer than 20 minutes and to lower the temperature below 210°C to avoid overheating.
The recommended nozzle size is 0.6 mm for carbon fiber-reinforced filaments, and it’s suggested to use a hardened steel nozzle. Compatible with the Bambu Lab AMS, this filament can be printed in high-speed mode for optimized efficiency.
Available Colors
Suggested print sets | unit | value | test method |
extruder temp | C° | 235-250 | internal |
plate temp | C° | 90 | internal |
min. nozzle diameter | mm. | 0,40 | internal |
fan | % | 0 | internal |
print speed | mm/1° | 30-60 | internal |
Physical Properties | |||
Density | g/cm3 | 1,05 | ISO 1183 |
Mechanical at 23°C / 50% rh | |||
Tensile Module | MPa | 65.5 | ASTM D882 |
Thermal | |||
vicat softening temperature | °C | 55-60 | ASTM3418 |
Unlock your 3d printer!
PROfila X series range gives you a premium Alternative at an unbeatable value. Do not suffer from the limit of your 3D printing ecosystem.