ProFila Premium Filament
X-series (made in EU)
was specificaly developed to be used with Zortrax M200 and M300 series.
Thanks to its adapted and unique chemical composition, you can print easily using the common profiles of Zortrax Z-Suite.
Please note that the spools are not compatible with the original Zortrax spools holder.
Available Colors
Suggested print sets | unit | value | test method |
extruder temp | C° | 225-240 | internal |
plate temp | C° | 90-105 | internal |
min. nozzle diameter | mm. | 0,3 | internal |
fan | % | 0-30 | internal |
print speed | mm/1° | 60-90 | internal |
Physical Properties | |||
Density | g/cm3 | 1,04 | ISO 1183 |
Mechanical at 23°C / 50% rh | |||
Tensile modulus | MPa | 2300 | ISO 527-2 |
Tensile Strength at Yeld | % | 2.6 | ISO 527 |
Notched Izod impact strenght 23° | kJ/m2 | 29 | ISO 180 / A |
Thermal | |||
heat deflection temperature | °C | 90 | ISO 75-2 |
Unlock your 3d printer!
PROfila X series range gives you a premium Alternative at an unbeatable value. Do not suffer from the limit of your 3D printing ecosystem.